GOTA — Get On The Air
QSO Entry
QRZ
Activation Programs
Notes
Settings
▾
QRZ Callsign Lookup
—
Lookups try QRZ first (worldwide, needs a QRZ XML subscription), then fall back
automatically to the free callook.info (US FCC) and HamDB
(US, Canada, Australia, Germany, Czech Republic) callbooks — no account needed, so callsign info
still fills in with the QRZ fields left blank.
Those are the only countries the free callbooks carry. A DX callsign outside them comes back N/F, and QRZ is what fills that gap — tap the N/F badge and the app says which it was. Note these settings live on the device, so a phone needs its own QRZ setup even if the shack PC already has one.
To enable QRZ: deploy the included
Requires a QRZ XML Data subscription for QRZ data.
Those are the only countries the free callbooks carry. A DX callsign outside them comes back N/F, and QRZ is what fills that gap — tap the N/F badge and the app says which it was. Note these settings live on the device, so a phone needs its own QRZ setup even if the shack PC already has one.
To enable QRZ: deploy the included
qrz-proxy-worker.js as a free
Cloudflare Worker, paste its …workers.dev URL above, and enter your QRZ
username/password. The worker keeps credentials off the public web and adds the CORS headers
browsers require — no shack PC or bridge needed.Requires a QRZ XML Data subscription for QRZ data.
Offline Callbook
Checking…
Country lookup already works offline — the DXCC prefix table ships with the
app, so any callsign on earth resolves to its country, continent and CQ/ITU zone with no signal and
nothing to download.
The optional download above adds operator names, towns and grid squares for US callsigns: the FCC’s weekly list of active licences, about 12.7 MB, stored on this device. Worth doing over wi-fi before a POTA activation or a GOTA day out of signal.
Two caveats. The grid comes from the licensee’s ZIP code, so it is the right area but not the exact station — normally the correct 4-character square, sometimes a neighbouring subsquare. And the file lists currently granted licences as of that week, so a recently reissued or brand-new callsign can be missing; the app always tries the live sources first when you have signal. Your log is stored separately and is never touched by downloading or deleting this.
The optional download above adds operator names, towns and grid squares for US callsigns: the FCC’s weekly list of active licences, about 12.7 MB, stored on this device. Worth doing over wi-fi before a POTA activation or a GOTA day out of signal.
Two caveats. The grid comes from the licensee’s ZIP code, so it is the right area but not the exact station — normally the correct 4-character square, sometimes a neighbouring subsquare. And the file lists currently granted licences as of that week, so a recently reissued or brand-new callsign can be missing; the app always tries the live sources first when you have signal. Your log is stored separately and is never touched by downloading or deleting this.
Backup & Restore
Your log lives only in this browser, on this device. Nothing is uploaded, there is no
account, and no copy exists anywhere else — so clearing site data deletes it, and a log made on a
phone does not appear on a laptop.
Export writes a JSON file through a normal download, which lands outside the browser’s storage and survives clearing it. On a phone Share sends the same file straight to Drive, Files or mail. Merge in adds the QSOs from a file that are not already here — the way to combine a phone log and a laptop log, matching on callsign, date, time, band and mode so nothing doubles up. Restore replaces everything instead.
Linking a file — where the browser supports it, the app can hold onto a file you choose and rewrite it after every change, with no further prompts, so a cleared cache costs nothing. That needs the File System Access API, which today means desktop Chrome or Edge — it is not available in Chrome for Android, Firefox or Safari, so the button only appears where it actually works.
The QRZ password is deliberately left out of the file — backups end up in Downloads and cloud drives, which is no place for a credential. Everything else, including your grid, control op, rig setup and all operating sessions, comes back.
Export writes a JSON file through a normal download, which lands outside the browser’s storage and survives clearing it. On a phone Share sends the same file straight to Drive, Files or mail. Merge in adds the QSOs from a file that are not already here — the way to combine a phone log and a laptop log, matching on callsign, date, time, band and mode so nothing doubles up. Restore replaces everything instead.
Linking a file — where the browser supports it, the app can hold onto a file you choose and rewrite it after every change, with no further prompts, so a cleared cache costs nothing. That needs the File System Access API, which today means desktop Chrome or Edge — it is not available in Chrome for Android, Firefox or Safari, so the button only appears where it actually works.
The QRZ password is deliberately left out of the file — backups end up in Downloads and cloud drives, which is no place for a credential. Everything else, including your grid, control op, rig setup and all operating sessions, comes back.
Send QSOs to the shack
CAT — Rig Control
Not connected
Auto-fill: ON
DTR: DOWN
Connects to the radio over the CAT cable using your browser's Web Serial API —
no extra software needed. Chrome or Edge on desktop only (over HTTPS).
IC-706MKIIG. Set
FT-991A. Set
The FT-991A's USB cable presents two serial ports. Pick the Enhanced one in the browser prompt — that is the CAT port. The Standard port is for PTT and will connect without ever answering.
The 991A reports DATA and C4FM modes that the log's Mode list has no entry for. Those show in the readout but are left for you to set, rather than guessing FT8 over PSK31 over JS8 and quietly logging the wrong one.
Android. Chrome on Android has no USB path in the Web Serial API — its port list only shows Bluetooth devices, so a CAT cable never appears there. Switch Connection to USB direct and the app talks to the cable's chip over WebUSB instead, the same way FT8AF drives CAT on Android. You will need a USB-OTG adapter, and the phone has to supply bus power to the cable.
Known chips:
One limit worth knowing: the browser gives no way to choose the line state as part of opening the port, and what it leaves them at beforehand is undocumented. The app puts them down as its first action, so the worst case is a brief blip rather than a stuck carrier — but it cannot be eliminated from a web page. Nothing on your radio needs changing: a station that works with WSJT-X is already correct.
Click CONNECT RIG, pick the CAT cable's serial port in the browser prompt, and the live frequency, band, and mode fill in automatically as you tune. Switch Auto-fill off to just monitor without overwriting the entry fields.
Wheel tuning: click the Frequency field, then scroll the mouse wheel (or press
IC-706MKIIG. Set
SET → CI-V Baud to match the dropdown
(19200 recommended) and keep CI-V Address = 58h. Turn
CI-V Transceive = ON so dial changes update instantly.FT-991A. Set
MENU 031 CAT RATE to match the dropdown. The radio ships at
4800; 38400 is the usual choice once you change it. Leave
MENU 033 CAT RTS alone.The FT-991A's USB cable presents two serial ports. Pick the Enhanced one in the browser prompt — that is the CAT port. The Standard port is for PTT and will connect without ever answering.
The 991A reports DATA and C4FM modes that the log's Mode list has no entry for. Those show in the readout but are left for you to set, rather than guessing FT8 over PSK31 over JS8 and quietly logging the wrong one.
Android. Chrome on Android has no USB path in the Web Serial API — its port list only shows Bluetooth devices, so a CAT cable never appears there. Switch Connection to USB direct and the app talks to the cable's chip over WebUSB instead, the same way FT8AF drives CAT on Android. You will need a USB-OTG adapter, and the phone has to supply bus power to the cable.
Known chips:
CH340/CH341, CP210x, FTDI, PL2303 and
plain CDC-ACM. The readout names the chip it found, and shows the raw
VID:PID when it does not recognise one — send me those four digits and I can add it.
On connect the app holds both DTR and RTS down. On most modern radios one of those
lines is SEND/PTT — that is how WSJT-X and N1MM key the rig — so raising
either one puts the radio straight into transmit. This app never transmits, so it never raises them.
The DTR toggle is only for an outboard CI-V level converter that takes its power from
the handshake line; leave it DOWN unless you have one, and expect the radio to key if SEND is mapped
to DTR.One limit worth knowing: the browser gives no way to choose the line state as part of opening the port, and what it leaves them at beforehand is undocumented. The app puts them down as its first action, so the worst case is a brief blip rather than a stuck carrier — but it cannot be eliminated from a web page. Nothing on your radio needs changing: a station that works with WSJT-X is already correct.
Click CONNECT RIG, pick the CAT cable's serial port in the browser prompt, and the live frequency, band, and mode fill in automatically as you tune. Switch Auto-fill off to just monitor without overwriting the entry fields.
Wheel tuning: click the Frequency field, then scroll the mouse wheel (or press
↑/↓) to step the frequency — Shift for 100 Hz,
Alt for 10 kHz. With the rig connected each step is sent to the radio, so the wheel acts as
the VFO knob; with no rig connected it just sets the entry field.
Device PIN
Asks for a PIN before the logger opens on this device. There is no PIN until you set one.
This is a tidiness lock, not security. It is checked in the page and stored in the browser, so anyone with developer tools can read or skip it. It keeps a shared shack laptop or a club tablet from being opened by accident. A static site with no server behind it cannot do better than that, so do not rely on it to protect anything.
It is left out of backup files, and it is per device — setting one here does not set it on your phone.
This is a tidiness lock, not security. It is checked in the page and stored in the browser, so anyone with developer tools can read or skip it. It keeps a shared shack laptop or a club tablet from being opened by accident. A static site with no server behind it cannot do better than that, so do not rely on it to protect anything.
It is left out of backup files, and it is per device — setting one here does not set it on your phone.
App Version
Loaded build —
An installed PWA can keep serving the copy of the app it saved offline, and a browser hard-refresh
does not clear that copy. This button unregisters the service worker, deletes every cached file, and
reloads from the server — use it if a change you expect is missing. Your log is stored separately
and is not touched.
0Total QSOs
0Unique Calls
0Students
—Bands Worked
—Last Contact
| # | Date | Time | GOTA Op | Ctrl Op | Callsign | Freq | Band | Mode | RST | Programs | Name | Notes | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
No contacts logged yet
█ Ready to log QSOs
| |||||||||||||